![jaykay18](/img/default-banner.jpg)
- 4 686
- 24 483 390
jaykay18
United States
Приєднався 23 січ 2006
Drinking, partying, fixing stuff.
BN-LINK 4-Pack Heavy-Duty Smart Plugs Review
Originally recorded June 24, 2024.
These Smart Plugs use the BN-LINK app, but they are compatible with the Smart Life app, which you may already have on your phone or tablet. Setup was an absolute breeze. Early incarnations of these devices were very hard to set up, and usually didn't work right for several iterations. This one worked just like the instructions said, in just a few moments it connected right up without any technical skills needed. Plain and simple, it just works right out of the box. These plugs handle the full 15A of current, 1875 Watts.
Buy this 4-Pack of Heavy-Duty Smart Plugs on Amazon:
www.amazon.com/BN-LINK-Monitoring-Function-Compatible-Assistant/dp/B07CX5KLXN
These Smart Plugs use the BN-LINK app, but they are compatible with the Smart Life app, which you may already have on your phone or tablet. Setup was an absolute breeze. Early incarnations of these devices were very hard to set up, and usually didn't work right for several iterations. This one worked just like the instructions said, in just a few moments it connected right up without any technical skills needed. Plain and simple, it just works right out of the box. These plugs handle the full 15A of current, 1875 Watts.
Buy this 4-Pack of Heavy-Duty Smart Plugs on Amazon:
www.amazon.com/BN-LINK-Monitoring-Function-Compatible-Assistant/dp/B07CX5KLXN
Переглядів: 20
Відео
Pool Opening 2024, Part 11 - Backwashing The Filter For The First Time Since Open
Переглядів 1472 години тому
Originally recorded May 26, 2024. It was time to finally backwash. Vacuuming out all the green to waste, manually, did the trick so it seems. When the filter pressure on the gauge reads about 10 PSI higher than with a clean filter, it's time to backwash. Shut the pump, turn the multiport valve (or adjust the valves on your equipment) to the backwash position and turn the pump back on. Watch the...
Valorise 2.4GHz Wireless Gaming Headset Review
Переглядів 574 години тому
Originally recorded May 23, 2024. Nice wireless headset. Easy hookup, plug the transceiver into any USB port, turn the switch on the headset on, and it's paired and ready to go. The wireless connection is on the 2.4GHz band, not Bluetooth, so there's negligible latency. But is also does have Bluetooth built in so if you want to pair it that way, or with your phone or tablet, you can. In additio...
Pool Opening 2024, Part 10 - First Manual Vacuuming Of 2024
Переглядів 1977 годин тому
Originally recorded May 24, 2024. Since no amount of chlorine tabs, shock, algaecide, or hand grenades will budge the green-ness in the pool, there's only one way to remove it. While many may be tempted to put their automatic pool cleaner in and let it do the dirty work for them, this is way more of a task than it would ever be able to handle. To manually vacuum, it takes a little preparation a...
AUTOONE 10-Pack 194-Type Automotive LED Bulb Review
Переглядів 899 годин тому
Originally recorded May 23, 2024. Some stock footage used. These are direct-replacement LED bulbs to fit 194-type automotive bulbs. These are found in many different lights in a vehicle, commonly license plate lights, rear marker lights, side marker lights, dashboard lights, map lights, dome lights, glovebox lights, etc. Very common bulb. These AUTOONE bulbs are much brighter than the original ...
Pool Opening 2024, Part 9 - Adding D. E. To The Filter
Переглядів 24312 годин тому
Originally recorded May 21, 2024. This video shows how to start up your Diatomaceous Earth Pool Filter. With the pump off, rotate the multi-port valve to normal Filtration. Watch the gauge on the filter, and wait for a full minute to allow the gauge to rise. Ensure the pressure reads about normal with a clean filter. Open the manual air relief valve to let out any remaining air. Administer seve...
Pool Opening 2024, Part 8 - Shocking The Pool, THE EASY WAY!
Переглядів 21914 годин тому
Originally recorded May 21, 2024. This video demonstrates one way to add chlorine shock to a pool. I HIGHLY SUGGEST you follow the directions on the package. The way I show here is NOT the correct way to do this, but I find it to be much easier and much faster than doing it the "right way". The "correct" way to do this is to dissolve the shock in a bucket full of water, then spill this around t...
IMPORTANT: I've Been Dealt A Blow In Life...
Переглядів 33714 годин тому
Originally recorded June 24, 2024. Looks like age is catching up with me quick. I'm starting to have problems now that I didn't think would be happening for another 5-10 years. I've had a poor oral history all my life. The first few years were fine. Ultimately, when I was in the second grade, I needed to get braces. Long and short of the story was I had braces for 11 years. 11 agonizing years. ...
ANCEL Wireless Car Battery Monitor Review
Переглядів 46516 годин тому
Originally recorded May 28, 2024. An excellent device for keeping tabs on your battery's health. This device attaches to your car battery terminal (or boat, or motorhome, or any other battery) and the small transmitter stays under the hood. In the cabin, you have the receiver unit, that will show all sorts of information, such as current voltage, state of health, state of charge, etc. It's abso...
Pool Opening 2024, Part 7 - Opening The Skimmers
Переглядів 20619 годин тому
Originally recorded May 21, 2024. When you open the skimmers, there will be a lot of air in the lines (as they were winterized). This means the pump will lose prime. With everything else working correctly, the pump will catch prime again within a minute or two in most cases, and the pump will start doing its job again. At that point, the other skimmer can be opened. It's best to open the valves...
Super Clean Tough Task Cleaner-Degreaser Review (Outdoor Edition)
Переглядів 13121 годину тому
Originally recorded June 10, 2024. Super Clean is the Original Tough-Task Cleaner-Degreaser. Pull the trigger and Super Clean goes to work, dissolving grease and removing grime, oil, wax, dirt, and tar. Super Easy. Super Fast. Use it at full strength for super cleaning power, or dilute it for everyday messes and you’ve got super value. Industrial strength, yet biodegradable and phosphate-free. ...
Pool Opening 2024, Part 6 - Adding Chlorine Tabs To An Automatic Chlorinator
Переглядів 205День тому
Originally recorded May 18, 2024. In this video, I demonstrate how to add chlorine tablets to a Hayward Automatic Chlorine Feeder (chlorinator). I fill my chlorinator with 6 tablets once a week. The setting on the dial is left at maximum all the time. If there's going to be an unusually hot week in the summer, sometimes I'll go ahead and add an additional tablet. The same goes true if the weath...
AOPICK 1000X Digital Microscope With 4.3" Screen Review
Переглядів 125День тому
Originally recorded May 26, 2024. This Digital Microscope from AOPICK does it all! The microscope will magnify the subject 10-1000X. It's mounted on a nice stand and includes a remote. Focus wheel is easily reachable. The scope itself has 8 LEDs built-in, which can illuminate the subject directly. All lights can be dimmed or shut off completely. The 4.3" screen that is built in gives a nice, sh...
Pool Opening 2024, Part 5 - Testing The Pool Light, Solar, What's Next?
Переглядів 192День тому
Originally recorded May 18, 2024. Will the pool light still work? Even being incandescent after all these years? What about the solar, do you think that stands a chance? Watch and find out! Related videos: Pool Opening 2024, Part 4 - Will It Work??? ua-cam.com/video/6tfqShe4gAI/v-deo.html Pool Opening 2024, Part 3 - Hooking Up The Pumps ua-cam.com/video/xYObU1Lk6eU/v-deo.html Pool Opening 2024,...
Pool Opening 2024, Part 4 - Will It Work???
Переглядів 302День тому
Originally recorded May 18, 2024. Now, the moment of truth, will it work??? Related videos: Pool Opening 2024, Part 3 - Hooking Up The Pumps ua-cam.com/video/xYObU1Lk6eU/v-deo.html Pool Opening 2024, Part 2 - Removing The Plugs And Installing The Jets ua-cam.com/video/CZeDKv0_Oyw/v-deo.html Pool Opening 2024, Part 1 - Removing The Leaf Nets And Cover ua-cam.com/video/zpnrn6rGR_o/v-deo.html How ...
Quntis Motion Sensor Outdoor Light Review
Переглядів 14314 днів тому
Quntis Motion Sensor Outdoor Light Review
Pool Opening 2024, Part 3 - Hooking Up The Pumps
Переглядів 21614 днів тому
Pool Opening 2024, Part 3 - Hooking Up The Pumps
G JGOO Keyboard Wrist Rest & Mouse Pad Review
Переглядів 6814 днів тому
G JGOO Keyboard Wrist Rest & Mouse Pad Review
Pool Opening 2024, Part 2 - Removing The Plugs And Installing The Jets
Переглядів 22714 днів тому
Pool Opening 2024, Part 2 - Removing The Plugs And Installing The Jets
Neporal Magicpro 2-Pack RGB Rechargeable Light Bulbs Review
Переглядів 14414 днів тому
Neporal Magicpro 2-Pack RGB Rechargeable Light Bulbs Review
Pool Opening 2024, Part 1 - Removing The Leaf Nets And Cover
Переглядів 35914 днів тому
Pool Opening 2024, Part 1 - Removing The Leaf Nets And Cover
Replacing Bluick Trunk Light & Startup WITH STALL OUT! Will It Restart???
Переглядів 18614 днів тому
Replacing Bluick Trunk Light & Startup WITH STALL OUT! Will It Restart???
BN-LINK 6-Outlet Extender With USB Review
Переглядів 11021 день тому
BN-LINK 6-Outlet Extender With USB Review
Preparing Pool Shock (So I Don't Have To Think About It All Summer)
Переглядів 55821 день тому
Preparing Pool Shock (So I Don't Have To Think About It All Summer)
TEDFLOP Mini Projector With Android TV Review
Переглядів 13921 день тому
TEDFLOP Mini Projector With Android TV Review
Replacement Backyard Hose Reel - ELEY 2-Wheel Hose Reel Cart
Переглядів 30921 день тому
Replacement Backyard Hose Reel - ELEY 2-Wheel Hose Reel Cart
Jaihonda Dementia Clock For Seniors Review
Переглядів 10428 днів тому
Jaihonda Dementia Clock For Seniors Review
I followed your directions on my 2001 Camry and it worked 🎉 Thank you!!!!!!
You're welcome.
Nice smart plugs. I have 4 smart plugs and they’re called Mesh Smart Plugs. I set up 3. Mini Lights, Front Lights, and Plasma Globe Lights. Mini Lights turn off at daytime and on at nighttime. Front Lights turn on when it’s raining, and it turns on 30 minutes after sunset and turns off at 11:30 PM. And for Plasma Globe Lights, they turn off 30 minutes before sunrise and turn on 30 minutes after sunset. So I have a total of 4 smart plugs plugged in. 1 Gosund, and 3 Mesh.
Most important feature with these is that they will handle the full 15 amps.
@@jaykay18 How many smart plugs do you have?
@@danterioscarrion Somewhere in t he neighborhood of 15 to 20. Not to mention I have other devices that have the "smart" built into them already.
Hello, can you tell me how you put tripod on please? You skipped that bit, so I couldn't see Thanks JoJo😊
If you can screw in a light bulb, you can attach the tripod. Seriously, it IS that easy. There's a hole on the bottom the tripod threads into.
You did great! Thank you for this useful information. 😊
Thank you for video had same problem with my john deere self propelled. Save me a lot of work.
You're welcome.
Great video i appreciate your help im about to do mine thanks
You're welcome.
thank you very much, this worked for me !!!
You're welcome.
4.5 years later, almost like it never happened, it's around but just treated as a regular cold or flu
Yes, perhaps the disease itself is that way. But the damage caused in it's way hasn't gone away, and never will go away.
@jaykay18 absolutely true and the risk of developing long covid is still there and still can be a very unpleasant experience. Here in uk, all restrictions, including mask and isolation mandates, have been removed since Feb 2022.
@@declanmarsh7398 I don't remember when they lifted the mask and isolation mandates, but they certainly have been lifted. One of the things I said immediately when this happened was about the long-term effects of this. Not the disease itself, but everything else. They were throwing the term "the new normal" around a lot. Now, the "new normal" is just normal, but there's nothing normal about it at all. Inflation, is probably the biggest concern. Not to mention all the other crap that went along with that, like hidden taxes and fees, credit card fees, fees for paying fees, the list is endless.
@jaykay18 exactly mate at moment lots of other chaos from conflicts to cost of living crisis. Just had a general election, which will keep the politics out lol all I will say is I didn't vote.
@@declanmarsh7398 Mmm-hmm. I know exactly what you mean.
Fuckim funny 😂
Thanks.
Ok, rinse! Ribense!
Only if you know where the term came from.
Wow, it really works! Thank you so much; it’s a big help. I was driving without it working for almost 4 months. Finally, it’s working thanks to your UA-cam tutorial video.
You're welcome.
Forgot to show humidity reading
That's interesting. The top number that says "%RH" stands for PERCENT RELATIVE HUMIDITY, and that shows on the screen all the time. How did I miss that?
Xshit im late too the party anyway those washers are the best dont get rid of them. I bought my washer used not knowing the missing model #.its just like yours. I was told parts can be interchanged.Any chance you can send that model #. I would say thanks and have fur but u already are 😜. Also funny video.
Thanks. Sorry, I don't own this machine, a friend does, or did, if he sold it. Parts indeed can be interchanged across many models. Keep watching videos on these washers, soon enough you will find another and may get the model number from that video. Sorry I couldn't help with that.
@@jaykay18all right and thanks for your reply. 👍
@@joeburttschell1286 You're welcome.
Almost 10 months later I know, of course the AC dick left out the kickstart. Great way to do your job Mr AC dick. How are these Rheems holding up now?
Like I said when I was there, how in the world can you possibly damage the spider gasket when the valve mechanism isn't even in contact with said gasket when the handle is pushed down and being turned?? Some of those "pool people" should not be around pools.
That's the entire point I'm making. Even the "pros" certainly aren't. Same thing with A/C service, that guy had no clue.
I'm sure my teeth are screwed at this point. I never liked going to the dentist as a kid and all I remember is pain! I haven't been to a dentist in decades. I'm sure my teeth will fail one day and fall out.
I was compliant and did what they said, but it was never enough, and I got screwed anyway. I always realized one day it was going to cost me, but at least they can be replaced.
How long was your hose?
Well over 200 feet.
Thank you. That worked. It was a very quick, easy, and affordable fix.
You're welcome.
i love these washers i think my auntie has a twin win whirlpool washer but sadly it wont drain but i think its fixable
it is.
Perfect! Not an electrical type of person. I accidentally did this to the Tramontina ice maker, and it worked. Best advice!
Thanks.
Didnt work at all pal....have a Silonn. Wtf
That's why it says MOST, and does not say all. Like "one size fits most" today so the really big people won't be offended.
does it play u.k regional dvd?
I'm not sure what part of REGION FREE you don't understand.
@@jaykay18 i didn't hear/see that..
@@stephenmccartney1606 It's on the Amazon listing page, the link to which I have so helpfully provided in the video description.
@@jaykay18 am going to buy it..i end up hospitalized 2 months of each year,,so will be good for the nights am up all hours like this morning 🤗
@@stephenmccartney1606 Hope you're all right.
I just bought this and am unable to calibrate the true barometer reading. I have the right number and followed the guide, but it doesn't set. WHat am I doing wrong?
I'm not Mr. Sainlogic. I can't possibly be expected to provide technical support for the entire world, I'm just a guy who did a review.
I have the whirlpool wfw94heaw0 and I can’t find the screw to turn it down
Very easy on that model. Bring it to the curb.
@@jaykay18 what does that mean
@@jamesobriant1417 Exactly what it says. How can you possibly adjust a computerized machine? Especially one that looks nothing like this one? IT'S JUNK, AND YOU'RE STUCK WITH IT.
Why did you install it in the first place? It can also shorten the life of the compressor motor. Those things are only for old units which have trouble starting. You just dont install one for nothing.
The video actually explained all of that, if you watched all the way through. You are correct, a hard start kit can shorten the life of the compressor, *BUT ONLY IF* the run capacitor is failing. In addition, these Rectorseal kits include a relay that cut the entire unit out of circuit as soon as the compressor starts. Many install hard start kits on brand new units and have great success and extra long lifespans. So you are incorrect that these are only used for old systems, typically an older system would have poor wiring connections and almost guaranteed a poor capacitance value, rendering it nothing more than a band-aid.
@@jaykay18 Thats all a hardstart kit is - a bandaid. You would be foolish to install one on a new unit, warranty violated and compressor could suffer whether the cap is good or not. If your system has a bad cap why dont you just replace it?
@@RadioRich100 Who said anything about a bad cap? I certainly never did, and obviously if I'm going through all this trouble I would have just replaced the cap. A hard start kit IS INDEED a good thing to have, even if it's not really necessary. I have a 2 Rheem units myself, a 1 aught cable feeding the house 200 amps, first house on the circuit, and a hard start kit makes a WORLD of difference.
@@jaykay18 Its going to make a world of difference when your unit wont start and an authorized tech tells you, your start winding is blown and you negated your warranty. A hard start is a last ditch effort to start an old compressor. And if you use one of those or a soft start you asking for premature failure. Do you really think that the people making these things know more than the people who designed your system to run without extra add on gadgets? I would like to know what "WORLD" of difference it could possibly make? You mean it blows colder air? I dont think so. The company that makes them sure wants you to think so.
@@RadioRich100 First of all, you seem to have a chip on your shoulder and have no reason being here to begin with since you think your shit doesn't stink. Second, my "authorized tech" came TWICE while I was out of town to fix a problem and misdiagnosed it BOTH times, and it took ME to fix it. As far as Rheem units go, these Rectorseal kits are factory-approved.
This actually works. Thank you, sir 🙏🏾
You're welcome.
I was just struggling with it and it’s worked you r saving life’s thank you so much I like I subscribed 🤍
You're welcome, and thank you for the subscription.
Really nice. The pool is looking better. I have had to manually vacuum a pool, but not this bad. I know it been worse for you in previous years so at least it’s less work. As far as the top fitting on the vacuum. There are ways to solve it. One way is to put a in line leaf canister. The way it works is some will come with a hose, you plug the hose directly into the hole at the bottom of the skimmer removing the skimmer basket and plate. the vacuum hose connection will be way in the water so you would have the depth of the skimmer mouth you can vacuum which means more vacuuming if you need it. Also I believe you said the hose does not reach that well to the other end of the pool so a canister will help extend the hose further.
Interesting, the leaf canister might be useful. I still like working in thirds on the pool vacuuming it,, keeps from overloading the drywell. Not to mention, if I had the canister and the ability to vacuum longer, I can get water out of the pool way faster than I can in. So that means it mght take a day or two for a refill.
Ok. Does the new hose spigot help with water flow to the pool. Was wondering since the old spigot was who knows how old if it started restricting its flow it could put out.
@@electricalsmokealarmsandmo1564 I certainly think it makes a difference! I bet that old one was restricting the flow for years. The old one I could also always hear when it was running, kind of like when you turn the sink on a bit and it's noisier than when the water is on all the way.
OMG thank you so much for this video. I just let my pool guy go and then got an algae bloom. Did a SLAM to clear it out of my pool but now my filter is not working so well. I was told to clean it. I saw a few videos and got so overwhelmed. But seeing your video has given me confidence on being able to get this done!! I appreciate you!!
You're welcome. Your pool guy might have been doing the right thing for you, because this happened as soon as you let him go. Keeping the pool maintained is what prevents the algae in the first place. I can do my weekly pool maintenance in about 15-20 minutes a week. If I skip it for some reason, algae will start. So it is imperative to keep on top of it during the swimming season. If you can't, you'll need somebody, and help doesn't come good, nor cheap these days.
Very nice, coming together nicely. Also, the birthday bush is looking dandy!
This is the "instant gratification" part, where the magic really happens. You can watch many other videos out there, one guy dumped a whole bunch of chemicals and turned the pool from green to blue instantly. While there may be some truth to that video, algae is like any other living thing, there are remains after it's dead. There's no way that algae immediately left the pool, it's impossible. Vacuuming it out is what does the trick here, not causing any pollution or anything, just using plain water that's in the pool already to do the work.
Birthday bush is dandy for about a week, usually during this which makes for a nice backdrop. Otherwise he needs trimmed, but now is not the time of year to do it. He's beautiful at night also now--video will come soon enough!
What manufacturer is the replacement multi-port?
You have your choice of the actual Hayward part, or a plethora of Chinese manufacturers with made up names that mean nothing. Chances are, the Hayward part is made in China also.
I guess I’ll just pick one and hope for the best. I have changed the Spider gasket before but looks like I need to replace the vari-flo valve totally (leaking) and DE flowing back into the pool. Question : the pool is running now. I do not have to do anything special to begin the process since there is water in the system? I will also likely place/glue a new gasket.
@@michellekaminsky1057 As long as the one you get is the right size and shape (like I showed in the video), it should work. My pool was running when I did mine, no special setup required, just shut it off, leave it for a couple minutes for the water to settle, and change it out. You can inspect the existing spider gasket. Mine was old but was still pliable and I had no other issues as such. If you have DE flowing back to the pool, that may be because the filter needs to be cleaned. If you haven't opened it and cleaned it, you'd be amazed at home much is left behind even after backwashing. That may be why DE is going back to the pool. It was in my case, until I opened and cleaned the filter.
I just fixed this in my 2002 Camry and it worked! And I'm not handy with cars at all. But I watched it three times and took my laptop to the car, did the test, bought the switch at the parts store, and had it installed in five minutes. Worked like a charm. YAY! I don't even want to know what this would have cost to fix, and it's 98 degrees outside, and hotter inside the car. THANK YOU!!!
This could have cost hundreds to even a thousand or two, depending on how uncrupulous your mechanic is. Imagine an honest mechanic, familiar with this problem, and him telling you it would be maybe 50 or 75 dollars to fix the A/C. For that small amount of money, you'd remember this guy and what he did for you immediately, and the next time you have a problem with your car, that's where you'd go. Too bad they don't think that way. Sometimes it's best to do small, quick services that people will remember you by, so they will come again next time.
@@jaykay18 THIS is so true! An honest mechanic, handyman, AC person, really an honest anyone - is really valuable these days. And I thank you for posting this video to help people - you saved me probably $500 to $1000 and I have rescue animals so every bit of savings helps the bottom line here. <3 I am grateful!
@@TrishaK1111 You are welcome.
it's nice how the rubber part on a nearly 20 year old leaf net would be intact whereas the one I got just 2 years ago already has that same part cracking and eventually breaking off. That's how much the quality of pool maintenance tools have changed in the matter of just 2 decades. Everything's getting cheaper and cheaper with even winter pool covers that used to last 6 years now only lasting about 1 year before they develop holes in them. I used to have a vacuum head that almost lasted 15 years before eventually becoming brittle and breaking. Pool tools today would now only last about 5 years at their longest before becoming brittle and eventually getting broken. You're right about brushing the algae because when I brush algae off the bottom of the pool, it will sometimes return to that same spot despite super chlorination since some types of algae are more tolerant of chlorine than others especially mustard algae which is why vacuuming it out to waste is the only way to remove it. Brushing it can also make the filter clog up faster than simply vacuuming out out of the pool which would then require more backwashing with sand and DE filters with cartridge filters being a nightmare to clean after brushing the pool.
I know exactly what you mean. But then again, 20 years ago, if you needed a pool tool, you would think of the pool store near you and not online shopping. Now with the proliferation of that, and other makers of pool tools that are compatible and comparable with the name brand stuff, you can have replacements in just a couple days.
Anyone know if this scanner can do a camshaft position sensor relearn procedure?
The best party to ask for that would be the manufacturer.
sweet dude thanks for the explanation
No problem.
How do you connect a second phone to it?
By reading the manual. No manual? LOST the manual *already?* You _could have:_ 1. Tried a number of different things on your own, it's not like you're going to mess up the device 2. Read the video description, where I so helpfully put the link to the Amazon listing page, and also announced it in the video. 3. Visited the Amazon listing page, perhaps you might find the information right there. Or, if not: 4. Checked the Amazon listing page very carefully, where you then would have found the manual available for download digitally as a PDF file, for reference at a moment's notice in the future. BUT INSTEAD, you wasted my time. Hopefully, you've learned an important lesson, which is to exhaust all possible resources you have available at your disposal first, then and only then ask for help.
What about a 4 wire one tho 😢
What about reading the video description first?
@@jaykay18sorry I was only asking a question cause I’m dealing with a 4 wire one sorry fr asking
@@stephannied3 That's why t he video description is there.
Thx im sooo happy for your help😊
You're welcome.
I got the "101 System Board Error" when the Pc is on,it's the same like this one,any help?
If my memory serves me correctly, that indicates the planar board (IBMspeak for motherboard) is bad and needs to be replaced. My recommendation is to tear down the entire machine and WASH the board in the sink. Let it air dry thoroughly for a few days. If there are any socketed chips, remove them, spray DeOxIt in the sockets, and reinstall. You never know, you might just fix it.
Super helpful video. Saved me a ton of time, money and sweat🥵. Thanks!
You're welcome.
Mine dosent work, the unit turns on but when I push the button it does nothing
Is it heating up? Fill it up, put the cap on, plug it in and leave it for 10 minutes. The outside of it should be quite warm. If it is and when you press the button to expel steam, it won't, it's time to break out the screwdriver and start fixing it. There's no magic button I can press on my end that will fix it.
@@jaykay18 I’ll see if there is anything I need to fix for it to work, thanks for the advice
@@saiah_yt795 Best of luck.
Thanks for sharing. You can never have enough engine monitoring info.
You're welcome, I agree.
Wow it is mind boggling!!! I spent too much time trying to fix the sprayer and I finally checked youtube and found your tutorial. You got it going. Thank you very much.
You're welcome.
Thank you so much! It was a breeze to do with your instructions! I wasn’t raised with my father but I think this is what it would have been like if my father was patient and kind like you! ❤
That is really nice of you to say! Thank you! Glad I was able to help you out!
Buy America Bullshit??? WTF?
Take a look at the "quality" products they make here now. They're no better than the Chinese stuff.
Hi. Can you correct odomeater with this device?
Not for 45 bucks, come on. 4500 bucks, maybe. But then if it were that easy, everyone would be doing that, and they don't need to own the tool, just know someone who has it. While you may have a very legitimate reason for needed to change it, others are unscrupulous. So forget the whole idea.
That cup holes 1 pound of DE. I finally did it right this year knowing the square footage of your filter grids mine are 36 ft.² divided by 10 equals 3.6 scoops so I put four in and I could not believe how the water cleared up in one night, that’s it for me. Have a good day.
No problem.
Also, as you know, backwashing does not remove all the DE you can backwash it six times pull the grids out there still old DE on them. You have to pull them out and clean them and I’ve been watching you and I have never seen you in the last five years, I’m wrong. Thank you.
He does have a video where he takes the filter housing apart and hoses off the grids. look up his video "What Backwashing Leaves Behind - How To Clean Your D.E. Pool Filter THE EASY WAY!!!"
@@lexmarks567 Thanks--in fact there are 2 of them.
I know you have to vacuum out the leaves and debris from the pool but could you just brush the green to get it off the liner and suspended in the water and let the filter take care of it? I guess vacuuming is possibly quicker but then you have to fill the pool again. Just a thought that went through my mind while watching this. Of course I'm not an expert on filters as I don't have one. I know I don't because people have told me I need a filter. ;)
The filter is really designed to maintain the clarity of the water, and of course does double-duty when the pool is first opened. But again, it's really meant for ongoing maintenance. Getting all that suspended in the water means a lot to filter out, and that means a lot of backwashing and filter media (DE) changes. I went through that in 2020. Vacuuming has ONE inlet open, so a lot less water goes out in the same amount of time, plus that goes OUT of the pool completely, bypassing the filter entirely. Best to just get rid of it. My grandmother grew up in the Great Depression and would not flush the toilet unless there were solids in it. All to save water. That's not a good idea. Even with today's insanity prices, and my insane water company that charges some of the highest water rates in the NATION, a 1.6gpf toilet would cost me 1.6 cents. I can afford that. Har har!
@@jaykay18 At the cottage our toilet rules used to be "If it's yellow then it's mellow. If it's brown flush it down." This is because we used to have a 1929 vintage septic system and we did our best to not over tax it. the toilet got quite ripe at times. Eventually all our sinks and the shower just dumped on the ground under the house and the only thing connected to the septic was the toilet. In the 80's all that changed when we had a brand new system installed. Now we can flush whenever we want and nothing dumps on the ground anymore.
@@tallboyyyy Yep yep, I've heard that one before. I can see how that worked with the ancient system, that was a good idea and probably extended the life of the system for a few more years.
I've had braces before. I hated the shit out of them.
Really not sure of anyone who likes them.